HYDEX® 4101 & 4101L (lubricated) is a very stable chemical compound that can withstand high impact without deterioration. It is approved for direct contact with food by the FDA and is ideal for machined parts in food processing equipment. HYDEX™ 4101 has excellent resistance to typical cleaning chemicals such as chlorine and caustic solutions and has a very low moisture absorption rate, as much as 15 times less than nylon.
- Good chemical resistance properties
- High impact strength
- A wear factor up to 50% better then PET-P
- Very low moisture absorption rate
- Excellent machining qualities
- No center line porosity
HYDEX® 4101 & 4101L (lubricated) exhibits a broad range of outstanding properties for a variety of applications, especially in the food processing industry. It is ideal for applications such as cams, bearings, gears, food pistons, wear strips, scraper blades, valve bodies and conveyor components.
| Properties | Condition | Value | Test Method | Comment | ||
|---|---|---|---|---|---|---|
| Mechanical | Modulus of elasticity (tensile test) | @ 73°F | 425,000 | psi | ASTM D 638 | |
| Tensile strength | @ 73°F | 9,400 | psi | ASTM D 638 | ||
| Elongation at break | @ 73°F | 50 | % | ASTM D 638 | ||
| Modulus of elasticity (flexural test) | @ 73°F | 420,000 | psi | ASTM D 790 | ||
| Impact strength (Izod) | 0.7 | ft-lbs/in | ASTM D 256 | |||
| Coefficient of friction | Static | 0.19 | 1) | 1) per LNP EPALP-TB001 | ||
| Coefficient of friction | Dynamic, 40 psi, 50 fpm | 0.25 | 1) | |||
| Wear rate | @2000 PV | 210 | in3-min/ft-lbs-hr | 1) | ||
| Thermal | Deflection temperature | @ 264 psi | 200 | °F | ASTM D 648 | |
| Service temperature | Long Term | 221 | °F | – | ||
| Other | Limiting PV | @ 100 fpm | 6,000 | psi-fpm | 2) | 2) per LNP EPALP-TB003 |
| Moisture absorption | @ 24 hrs, 73°F | 0.07 | % | ASTM D 570 | ||
| This information is only to assist and advise you on current technical knowledge and is given without obligation or liability. All trade and patent rights should be observed. All rights reserved. Data obtained from extruded shapes material. HYDEX® – Ensinger Industries, Inc. |
||||||